Make sure the engine is cold, and the glow plugs are turned off. Some glow plugs will not turn on if the engine is warm. Turn on the clamp-meter, and select ‘DC current’ mode. Put the clamp around the glow plug power wire, or around the top of the glow plug. Make sure that the clamp closes completely, and that the clamp meter is safe from
Glow plug in OEM quality with OE — number 71735460 from the leading manufacturers VALEO, MAPCO, FEBI BILSTEIN, METZGER, SWAG, VEMO to fit your FIAT, ALFA ROMEO, IVECO, LANCIA vehicle buy now online at low prices
Fiat Glow Plugs. Glow plugs are part of the mechanism that help your diesel engine to start properly. If you have trouble starting your Fiat 500, Punto, Panda, Ducato or any other Fiat, it could indicate a glow plug problem. Find your replacement Fiat glow plugs with us at Euro Car Parts by entering your reg details into our tool, we'll thenWhat resistance did you measure for the glow plugs should be somewhere between 0.5-1.5. OEM ones are 1.4 ohms. Dont forget to check the meter lead resistance first and subtract that from the reading. Measure the resistance via the relay socket to rule out wiring.
Nov 4, 2019. #1. Several owners of Fiat Ducato 2.5 TD appear to be having problems with starting due to glow-plug module (Bitron Video 2044029) failure. I have dispensed with mine altogether by substituting a HD relay in it's place controlled by a push button. Work very well - modification cost about £25.00 and a couple of hours work.
Fellow Craicer`s - I`m looking for this control unit for my camper. Mine is faulty and whilst the van still drives perfectly, I`m getting flickering glow plug warning lamp on dash and clicking sound from unit in the engine bay. Tried East Coast Campers but out of luck. Tried Ebay but nothing also. Fiat said the are no longer available so I need to go on a hunt for one. Has anyone got a spare
FIAT DUCATO Glow plug issue tried before but no replies so am trying again I have a fiat ducato Maxi MWB 2.8TD 2000 model and am after some information on the glow plug and relay sequence in warm weather there is no issue turn key light comes on for 1-2 seconds and starts no problem in colder conditions the light does not come on and I can here the relay clicking loudly the van still turns
by removing all the covering panels. Disconnect the car battery. Unplug the. car loom plugs connected to the SGW module (press lock; do not pull cables. but via plug; some plug types used by FCA sit very tight in SGW), and plug. them into the SGW bypass device. Reconnect the car battery. At this stage a.McHRG.